Winterthur Gas X40-B, Maintenance Manual

Page: 124 / 495

Maintenance
2124 − 2/A1
Winterthur Gas & Diesel Ltd.
2/ 7
2. Cylinder Liner − Removal
2.1 Lifting Tool − Install
1) Connect the crane hook to the shackle
(94201D, Fig. 1) on the lifting tool
(94210A).
2) Use the engine room crane to put the
lifting tool (94201A) in position on top of
the cylinder liner (1).
Note: The special screws (3) are installed
in the storage position (2) in the
holder (94201B).
3) Apply copper paste to the threads of
special screws (3).
4) Attach the two holders (94201B) to the
cylinder liner (1) with the special
screws (3).
5) Torque the special screws (3) to
120 Nm.
2.2 Cylinder Liner − Lift
1) Connect the crane hook to the shackle
(94201D) on the lifting tool (94210A,
Fig. 2).
2) Operate the engine room crane to
carefully lift the cylinder liner (1).
3) Move the cylinder liner (1) over the rail
unit (2).
4) Lower the cylinder liner (1) on to a
suitable wooden underlay. Refer to
paragraph 6 .
2016
Cylinder Liner − Removal and Installation
1
I I
I - I
2
94201B
3
94201A
94201D
94201A
WCH03611
Fig. 1
WCH03611
94201D
WCH03613
Fig. 2
94201A
1
2