Wilo DD-I, Installation And Operating Instructions Manual

Page: 136 / 196

en Configuration
136 WILO SE 2020-12
See installation and operating instructions of the frequency converter: Press the
Auto On key on the operating part.
3. Set pump to "automatic mode".
Function Modules ➜ Operating Mode (Pump) [ } 148]
4. To be able to use the clogging detection, calibrate the reference curve.
Function Modules ➜ Clog Detection ➜ Clog Detection - Teach Power Curve
[
} 148]
Activate system
1. Open the master home page of the system.
2. Set the system to "automatic mode": Operating Mode Selection
Function Modules ➜ Operating Mode ➜ Operating Mode (System) [ } 150]
6.5 Settings
NOTICE
Users must log in to configure settings!
Users must log in using the sidebar menu:
- User name: user
- Password: user
The default password is changed as part of initial configuration!
Overview of settings depending on the system mode.
Settings System mode
DDI LPI LSI Master LSI Slave
Menu Language
• • • −
Clock
• • • −
Units
• • − •
Digital Data Interface
Network Interface Settings
• • − •
Proxy Settings
• • − •
System Mode Selection
• • − •
LPI Control Settings
− • − −
LSI Mode System Settings
− − − •
Limits Temperature Sensors
• • − •
Limits Vibration Sensors
• • − •
Frequency Converter
IP / Type Select
− • − •
Auto Setup
− • − •
Ramp Settings
− • − •
Digital Inputs
− • − •
Analog Inputs
− • − −
Relay Outputs
− • − •
Analog Outputs
− • − •
I/O Extension
IP / Type Select
• • • −
Digital Inputs
• • • −
Analog Inputs (Wilo IO 2 only)
• • • −
Relay Outputs
• • • −
Alarm / Warning Types