Wilo DD-I, Installation And Operating Instructions Manual

Page: 127 / 196

Operation en
Installation and operating instructions Wilo DD-I 127
Text field
Fig. 25: Text field
You can directly input the corresponding value in text fields. Text field illustration de-
pends on the input:
ƒ
White text field
You
can input or change the corresponding value.
ƒ
White text field with red edge
Mandatory field! You must input the corresponding value.
ƒ
Grey text field
Text input disabled. Value is inserted automatically or log in to change the value.
Date and time
Fig. 26: Date/time
Set the date and time using the selection field if the date and time are not synchronised
using the NTP protocol. Click the input field to set the date and time:
ƒ
Select and click the date in the calendar.
ƒ
Set the time using the sliders.
5.4 Transferring input/changes
Any input and changes in the corresponding menus are not automatically transferred:
ƒ
Click "Save" in the corresponding menu to transfer input and changes.
ƒ
Select a different menu or change to the start screen to discard input or changes.
5.5 Start screen
The Digital Data Interface is accessed and controlled in an Internet browser using a
graphical user interface. The home page opens after entering the IP address. The home
page lists all important pump or pumping station information at a glance. It also
provides access to the main menu and user login. The display of the home page varies
depending on the selected system mode.
5.5.1 Home page: DDI system mode
1 2 3 4
6
5
7
8
9
1 Back
2 User that has logged in
3 Software licence/system mode
4 Sidebar menu
5 Browse main menu
6 Main menu
7 Pump data
8 Sensor values
9 Error protocol