Wilo DD-I, Installation And Operating Instructions Manual

Page: 131 / 196

Configuration en
Installation and operating instructions Wilo DD-I 131
6.2 Personnel qualifications
Operating personnel must meet the following prerequisites to configure and operate
pumps:
ƒ
Safe handling of web-based, English user interfaces
ƒ
Specialist language skills, particularly in English, for the following specialist areas
–
Electrical engineering, specialising in frequency converters
–
Pump technology, specialising in operating pump systems
–
Network technology, configuring network components
6.3 Prerequisites
The following prerequisites must have been met to be able to configure the Digital Data
Interface:
Prerequisite System mode
DDI LPI LSI
Network
Ethernet network: 10BASE-T/100BASE-TX, IP-based, with
DHCP server* • • •
IP address of the frequency converter
Verified from the DHCP server* by default. Refer to the
manufacturer instructions for information on how to assign
a fixed IP address! − • •
IP address of the I/O module
I/O module has been assigned a fixed IP address by default.
Note the manufacturer instructions to change this IP ad-
dress! o o •
User interface
Computer with Windows, Macintosh or Linux operating sys-
tem, Ethernet connection and installed Internet browser** • • •
Key
− = Not required, o = If required, • = Mandatory
*Network without DHCP server
Digital Data Interface has been set to DHCP by default. Consequently, all required net-
work parameters are access using the DHCP server. There must be a DHCP server in the
network for the initial configuration. Consequently, it is possible to permanently con-
figure the required IP addresses for operation without DHCP server.
**Supported Internet browser
The following Internet browsers are supported:
ƒ
Firefox 65 or more recent
ƒ
Google Chrome 60 or more recent
6.4 Initial configuration
Below are step-by-step instructions for the different system modes. You must ensure
the below points have been implemented before following the step-by-step instruc-
tions:
ƒ
All necessary electrical connections have been made.
ƒ
A fixed IP address has been defined for each component.
ƒ
Notebook or touch panel is available to access the web-based user interface (Web-
HMI).
NOTICE
Users must log in to configure settings!
Users must log in using the sidebar menu:
- User name: user
- Password: user
The default password is changed as part of initial configuration!
6.4.1 Initial configuration: System mode
"DDI"
Define a fixed IP address for the following components before starting the initial com-
missioning:
ƒ
Pump
ƒ
Notebook/touch panel (Web HMI)