PAGE 73 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
6.8.2
Using the Mast Down Button
Another method used to stow the mast is to press and hold "Mast Down" on the controller. This
method is not as reliable as using the Auto Stow® feature. Care must be taken to ensure that the
operator does not release the button before the mast is completely stowed. If the mast is not
completely stowed, equipment may be damaged during transportation.
To stow the mast using "Mast Down":
1. Press and hold "Mast Down" until the mast stops and the "Mast Down" LED is turned off,
indicating the mast has powered down. The mast will lower (if not already there), then go to
the RCP home position, and then stow the mast. Once stowed, the Mast Stowed Safety
Interlock Contact signals it is safe to move the vehicle.
2. Visually inspect that the mast is properly stowed and powered down. Ensure that the payload
will not bounce as the vehicle drives down the road.
3. Store remote controls if used so they will not be damaged during transportation.
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
