PAGE 19 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
Mounting Hardware:
Your system may come with either internal or external mounting hardware.
Note: Night Scan Vertical Complete mounting hardware is customer-provided.
Internal: The internal mounting kit (Figure 3-6) contains the brackets and seals used to position
and support an internally mounted mast. The kit includes a two-piece bracket, sealing gasket,
wear ring, and V-Seal. Bolts, lock washers and hex nuts, 1/4
inch or M6, not provided, can be
used to secure the assembly to the roof. Bolt length will depend on the specific application and is
to be determined by the installer.
Figure 3-6 Internal Mounting Kit
External: The external support bracket assembly (Figure 3-7) is a painted weldment that can be
bolted into a mounting structure and used to position and support an externally mounted mast.
Bolts, lock washers and hex nuts, 3/8
inch or M10 (not provided) can be used to secure the
support bracket to the support structure.
Figure 3-7 External Support Bracket Assembly
Non-Rotatable Base Plate:
The vertical mast attaches to a 5
inch square non-rotatable base
plate (Figure 3-8). Countersunk holes in the non-rotatable base plate match threaded holes on
the bottom of the base mast section.
Figure 3-8 Base Plate
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
