PAGE 16 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
3.2 Intended Use
The Night Scan Vertical, Night Scan Vertical Complete, and Night Scan Vertical HDT are
intended for use by professionals in the fire/rescue/first responder/security/towing industries to
provide elevated and directional emergency scene lighting and surveillance or communication
capabilities. It is not intended for use by non-professionals. Do not use the mast to lift personnel.
The mast systems are intended to be installed on fire/rescue/towing first responder vehicles with
the vehicle interconnect safety circuit installed and operational.
The Night Scan Vertical, Night Scan Vertical Complete, and Night Scan Vertical HDT mast
systems are intended to be used only when the vehicle is stationary and the vehicle parking
brake is properly applied. Do not supply input supply voltage or operate the mast system when
the vehicle is in motion. The mast must remain in the powered-down, nested position during
vehicle motion.
3.3 Mast Position Definition
The mast is pneumatically moved by air pressure to the extended position. The following
positions (see Figure 3-1) are used throughout this manual:
•
Stowed:
the position in which the Remote-Controlled Positioner (RCP) is firmly seated in the
saddle. This position is sometimes referred to as the "nested" position.
•
Extended:
the partial or full raised position that the mast pneumatically raises to from the
stowed position. In the extended position, some or all of the mast sections have risen.
Figure 3-1 Mast Positions
Stowed
Extended
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
