PAGE 42 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
5.4.8
Attach Optional Shelf Bracket
If using the optional shelf bracket, the mast base plate is installed on the shelf bracket instead of
the vehicle structure following section 5.4.6. The shelf bracket attaches to the vehicle structure
using the following steps:
1. Drill holes according to the dimensions shown in Figure 5-9, or use the shelf bracket as a
template.
2. Locate the shelf bracket into position and install customer supplied 3/8 inch or M10 bolts, lock
washers and flat washers. The installer should determine the proper bolt length for the
application. The recommended installation torque for an M10 stainless steel fastener is 28-33
Nm (245-290 in.-lb.). The recommended installation torque for a 3/8 inch stainless steel
fastener is 21-27 Nm (190-240 in.-lb.). It is recommended to also use thread-locking
compound.
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
