PAGE 47 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
5.4.9.2
Night Scan Vertical HDT
To attach the RCP saddle brackets:
1. Drill eight mounting holes into the mounting structure according to Figure 5-13. The brackets
can be used as a template to mark locations.
2. Attach the brackets using 9/16 inch or M14 bolts, lock washers and flat washers (customer-
provided). The installer must select the proper bolt length for the application. Torque all
hardware as appropriate for its material and size. It is recommended to use low strength
thread-locking compound.
3. The saddle is adjustable to accommodate all models of the RCP as well as variations in
mounting. The saddle must be attached so that it is centered with the RCP and mast base
tube. The height should be adjusted to firmly contact the RCP when the mast is nested. To
adjust the saddle height, loosen the 9/16 inch bolts and slide the bracket upward. Tighten the
bolts when positioned properly. The nuts have inserts to prevent vibration loosening. Ensure
each nut is tight to the bracket. Ensure the saddle is in contact with the RCP after tightening.
Figure 5-13 Night Scan Vertical HDT Saddle Mounting Holes
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
