PAGE 23 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
Lights:
The Night Scan Vertical systems and Night Scan Vertical Complete systems can come
with a variety of LED or Halogen lighting packages. Night Scan Vertical HDT
systems ship with
Will-Burt XL-160 LED lights. Lights are attached to the RCP by the light bar (Figure 3-14). Go to
www.willburt.com for additional information on available light packages.
Figure 3-14 Left: Night Scan Vertical Lights; Right: Night Scan Vertical Complete Lights;
Bottom: Night Scan Vertical HDT Lights
Camera/Strobe:
Go to www.willburt.com for the latest optional cameras and strobe lights.
Lower Magnetic Switch
(not shown):
This magnetic switch is attached with a band clamp on the
base tube of the mast (see Figure 5-21). It indicates when the mast has reached the stowed
position.
Upper Magnetic Switch
(not shown):
This magnetic switch is attached with a band clamp on the
base tube of the mast and is located above the lower magnetic switch (see Figure 5-21). It
indicates when the lights have reached a height sufficient to clear all vehicle obstructions to RCP
motion. Once this switch is activated, the RCP functions are enabled.
Labels:
Extra warning labels are provided to attach near the operator control station.
Power Converter:
The Power Converter is standard with the Night Scan Vertical HDT, but it is
optional with other Night Scan Vertical models. The system uses a 12 to 48 volt DC to DC power
converter (Figure 5-22). The power converter has a 58 volt, 30 amp fudualse (P/N: 221033) on
the output side. Operating the power converter above 150°F (65°C) may cause damage to the
unit.
Lights
Lights
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
