PAGE 44 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
5.4.9
Attach the RCP Saddle Brackets
The RCP saddle brackets (Figure 5-10) must be installed to support the lights and RCP when the
mast is nested and the vehicle is in transit. The brackets are adjustable in height to obtain the
proper position to allow the RCP to rest against the saddle brackets when nesting. When the
mast is nested, the saddle brackets should be in firm contact with the RCP structure to prevent
vibration damage to the mast and RCP. Leaving a gap may result in damage to the mast system.
The bolt pattern between the two brackets is square so the bracket can be deck mounted
vertically or rotated 90° to bolt to a vertical support structure as shown in Figure 5-12.
Figure 5-10 Saddle Brackets (shown in two optional orientations)
The support structure must be rigid enough to support the RCP and lights at a combined weight
of 45 kg (100 lb.).
To attach the RCP saddle brackets for the Night Scan Vertical, see Section 5.4.9.1. To attach the
RCP saddle brackets for the Night Scan Vertical HDT, see Section 5.4.9.2.
Shown for Vertical
Mount Position
Shown for Deck
Mount Position
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
