PAGE 58 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
To attach the bulkhead:
1. Drill clearance holes for 1/4-20 screws located per Figure 5-23. Either two hole pattern can
be selected according to the space available.
2. Using the screws, washers, and nuts provided, attach the bulkhead to the vehicle. Torque the
1/4-20 screws to 62-70 in.-lb. (7-8 Nm). Alternative M6 stainless steel hardware (not
provided) can be used.
3. Attach the ground wire to the vehicle.
4. Attach the HHRC connector to the bulkhead connector by rotating the lug until it locks in
place.
Figure 5-23 HHRC Bulkhead Bracket Installation Dimensions
Summary of Contents for Night Scan Vertical 4.3-15
Page 2: ......
