8�3
Disconnection
Î
After the fueling process has been completed and the
hose has been fully vented, disconnect the fueling nozzle.
Î
Pull the locking lever (Pos. 5) back in the direction of the
arrow (
) to release the locking mechanism and
move the actuation lever to the OFF position.
Î
Lift the hose of the fueling nozzle slightly and remove the
fueling nozzle from the receptacle.
Attention:
Do not rotate the TK17 H
2
70 MPa ENR while
removing it (
).
Î
Replace the fueling nozzle back into the dispenser mount-
ing according to the instructions at the fueling station.
Note:
After replacing into the dispenser mounting, the
fueling nozzle must be purged with nitrogen.
Figure 13
Figure 12
MD-10013-L51-R1.6.0-03
Page 26
Operating instructions
AE
Summary of Contents for TK17 H2
Page 2: ......
