Weh TK17 H2, Operating Instructions Manual

Page: 40 / 96

10. LUBRICATION
Please note: Subsequent mentions of descriptions and position numbers refer to
Chapter 3. Product overview / product description on page 10 .
10�1 Safety instructions for lubrication
Î
Take care not to damage sealing surfaces or sealing components when lubricating.
Î
Only use WEH
®
Maintenance spray part no. E99-44923 for lubrication.
10�2 Lubrication
Î
Spray once briefly using the small dispensing tube
between every second clamping jaw ( Figure 15 ).
Î Pull the impact protection sleeve (Pos. 1) forward. Spray
the marked area ( Figure 16 ).
Î
Pull off the logo cap (Pos. 3) by hand and apply approx.
1–2 short sprays into the openings on the left and right
using the small dispensing tube ( Figure 17 ). Then replace
the logo cap (Pos. 3). This should click audibly into place.
Attention: The lubricant must not be allowed to enter the
gas channel ( Figure 15 ).
Figure 16
Figure 17
Figure 15
MD-10013-L51-R1.6.0-03
Page 40
Operating instructions AE