Weh TK17 H2, Operating Instructions Manual

Page: 25 / 96

8�2 Connection
Î
Lift the fueling nozzle out of the dispenser. The actuation
lever (Pos. 6) must be in the OFF position ( Figure 9 ).
Î Push the fueling nozzle onto the receptacle on the vehicle
until it stops and hold the nozzle in this position
(OFF position) ( Figure 10 ).
Please note: For easier handling, the TK17 H
2
is equipped
with a swivel joint (Pos. 4).
Attention: Hold the fueling nozzle in a downward position
before connecting.
Î Pull the actuation lever (Pos. 6) on the hand grip (Pos. 7)
of the fueling nozzle fully up to its ON position
( Figure 11 ) until it engages with an audible click.
The actuation lever (Pos� 6) must be engaged before the
fueling process can begin! If the actuation lever cannot
be operated easily or it does not engage properly, remove
the fueling nozzle and then reattach it.
- The fueling nozzle is now pressure-tight connected to the
receptacle.
- The fueling process can begin.
Note: Please note that purging via the fueling nozzle may
cause air noise during fueling process.
Figure 9
Figure 10
Figure 11
MD-10013-L51-R1.6.0-03
Page 25
Operating instructions AE