General Descriptions
Seite 9 / 180
Install using non-combustible materials (metal etc.)
It is a fire risk.
………
.
p.2-
1
Do not install combustible materials nearby.
It is a fire risk.
………
.
p.2-
1
Do not carry unit by top cover, always carry by supporting base of unit.
There is a risk of falling and injury.
………
.
p.2-
1
Do not allow substance of cutting waste, sputtering of welding, waste of
iron, wire and dust etc. to come into contact with the unit.
It is a fire risk.
………
.
p.2-
1
Make sure the surface the unit is installed onto can support the weight of
the unit comfortably.
There is a risk of falling and injury.
………
.
p.2-
1
Do not install or operate the unit if the unit appears damaged.
There is a risk of injury.
………
.
p.2-
1
Avoid locations of high temperatures, high humidity, dew condensation,
dust, corrosive gases, explosive gases, combustible gases, coolant mist
and sea damage etc. Install indoors, to avoid direct sunlight and the unit
should be well ventilated.
………
.
p.2-
1
Be sure that the rated voltage matches the AC power supply voltage of
the unit.
Otherwise, there is the danger of injury and/or fire.
………
.
p.2-
5
Be sure not to connect an AC power supply to the output terminals.
Otherwise, there is the danger of injury and/or fire.
………
.
p.2-
5
Be sure not to connect an AC power supply to the output terminals.
Otherwise, there is the danger of injury and/or fire.
………
.
p.2-
5
Be sure not to connect the resistor to the direct current terminals (PD, P,
and N).
Otherwise, there is the danger of fire.
………
.
p.2-
5
CAUTION