WAGNER TITANUS, Technical Manual

Page: 202 / 208

TITANUS MICRO·SENS
®
Glossary
TMS_A_Glossar-e – Data: 01/09
P
Primary line Primary lines are transmission lines permanently
and automatically checked for short circuit and
interruption. They serve the transmission of
important function signals of smoke detection
systems.
Plug and Play Installation and commissioning of the air sampling
smoke detection system are simple with the Plug
& Play function.
PIPE·GUARD
PIPE·GUARD , the comprehensive package for
airflow monitoring, recognises safe breakdowns
such as pipe breakages or blocked detection
apertures.
Q
Quiescent current Current on the detection line in its normal
operational state,
→
alarm current
R
Response sensitivity The response sensitivity describes the sensitivity
at which an alarm is activated (
→
detector module
sensitivity).
ROOM·IDENT The ROOM·IDENT technology makes it possible
to to locate a fire in seat monitoring up to 5
separate areas.
S
Scattered light smoke detectors Scattered light smoke detectors are optical smoke
detectors. They use the phenomenon of scattered
light through smoke particles which changes the
signal at the light diode.
Secondary line Non-monitored transmission lines.
Sensitivity The TITANUS MICRO·SENS
®
reaction threshold
can be set at between 0.5 %/m and 2 %/m light
extinction in steps of 0.1%/m.
Single hole monitoring Detection of changes (e.g. blockages) of the
diameter of each single air sampling point.
Smoke detector Smoke detectors react to combustible particles
and/or
→
aerosols (floating particles) in the air.
T
Temperature compensation The air flow in the pipe system is not falsified by
temperature variations when using temperature
compensation.