WAGNER TITANUS, Technical Manual, Page: 16 / 208

Product Description TITANUS MICRO·SENS
®
1 – 2
Data: 01/09 MS_A_01-en-e
Plug and Play Installation and commissioning of the TITANUS MICRO·SENS
®
are
simple with the Plug & Play function.
The device base is pre-assembled on site. By pre-setting the detection
unit for standard applications, the TITANUS
MICRO·SENS
®
is operational
immediately after it is inserted in the device base.
Redundancy
ventilators For maximum safety, the TITANUS MICRO·SENS
®
can be fitted with
redundancy ventilators as an option. During operation of the device with
the redundancy ventilator, ROOM·IDENT is not possible.
Network capacity Fitted with a network card, several TITANUS MICRO·SENS
®
devices can
be linked together in an Ethernet network. From a central point the user
can, for example, via VisuLAN T
®
monitor the whole plant for smoke
levels, airflow values etc. In addition, the TITANUS MICRO·SENS
®
can
be integrated via the so-called OPC server into existing hazard and build-
ing management systems.
Potential free
contacts The TITANUS MICRO·SENS
®
has one potential free contact each for
alarm and fault. So the smoke detection system can be switched to col-
lective and addressable
0F
1 recording lines of any central fire alarm systems
(FAS). A relay card (optional) can be connected to the TITANUS
MICRO·SENS
®
in order to connect the potential-free contact for the pre-
alarm to a detector line of a CFDU.
Diagnostics With the DIAG 3 diagnostics device, there is a system available for
commissioning, inspection and servicing which makes it possible to
configure the device quickly and easily and contain faults. For
diagnostics purposes events are stored in the TITANUS
MICRO·SENS
®
for 72 hours.
Designing
detection points The monitoring surfaces of the detection point type for the TITANUS
MICRO·SENS
®
are to be set to match the point-specific smoke alarms.
The detection points can thus be designed similar to point-specific smoke
alarms in accordance with the particular national regulations.
Patented
detection points Wagner’s patented detection reducing films, clips and banderols make
assembly simple and comfortable and avoid whistling operational noises.
An even inflow of air through all the apertures is achieved with a stepped
aperture diameter. These are fitted with rapidly checkable identification.
Extensive
pipe accessories Wagner’s extensive range of accessories makes it possible to use the
TITANUS
®
aspirating smoke detection system even under the most
difficult of conditions. Products from various types of air filter from
condensate traps to blow through devices raise the serviceable life under
extreme dusty, humid and excessively cold environmental conditions.
1
Via the address module of the particular FAS.