Help
Contents
Back
<<
>>
CALIBRATING THE INTERACTIVE PEN DISPLAY
You will need to calibrate the tablet in order to line up the screen cursor position with the position of the
pen on the Interactive Pen Display. On a multiple monitor system you may also have to select the LCD
display when calibrating the tablet.
After setting the tablet in its working position, follow the procedure below to calibrate the tablet.
1.
From the control panel, select
the C
ALIBRATION
tab.
2.
If you are working with multiple
monitors, select the M
ONITOR
that corresponds to the tablet’s
LCD display.
3.
Click on the C
ALIBRATE
...
button to display the monitor
calibration screen.
Important: If you are using a VGA connection with your Interactive Pen Display,
make sure the LCD display is properly adjusted before calibrating the tablet.
