VOTI XR3D-6, Maintenance & Troubleshooting

Page: 53 / 94

XR3D-6 Maintenance & Troubleshooting
EM-XR3D-6-001-EN.D 5-1
©2011 VOTI Inc.
5 H
ARDWARE
T
ROUBLESHOOTING
P
ROCEDURES
5.1 Wiring Overview
5.2 AC/DC Power
The scanner is preset at the factory to run on either 110-120VAC at 60 Hz or 220-240VAC at 50
Hz. The setting is clearly marked on the scanner near the
power cord. External power enters the
Power Distribution
Unit . The circuit breaker at the front of the unit controls
power to all the plugs. However, the plugs labelled C, E,
F, and 4, 5, 6 are controlled by the BioSans© software.
The UPS, X-Ray source and the Conveyor Motor are
plugged directly into the Power Distribution Unit.

C: UPS input line

E: XRAY Source input line

F: Motor Control input line

Spares: A,B,D,1,2,3,4,5,6