XR3D-6 Maintenance & Troubleshooting
2-6
EM-XR3D-6-001-EN.D
©2011 VOTI Inc.
2. Set an item on the conveyor belt at the tunnel entrance.
3. Click and release the forward arrow (
) on the screen to start the conveyor.
Indicator lights on the scanner turn red during X-ray generation. A warning icon (
)
appears on the monitor.
The resulting scan displays in the Main Viewing Screen and alternate views appear in the
Alternate Scan View area.
4. Check the quality of the image.
5. Repeat the scan in the reverse direction,
.
6. Use each feature of the User Interface.
7. Log out and then log in with Administrator privileges.
8. Change the Risk Assessment Level in the
Risk Assessment
tab.
9. Perform new scans with the different speed, for example, slow conveyor speed is a Severe
risk setting, and a fast conveyor speed is a Low risk setting.
Summary of Contents for XR3D-6
