VOTI XR3D-6, Maintenance & Troubleshooting

Page: 13 / 94

XR3D-6 Maintenance & Troubleshooting
EM-XR3D-6-001-EN.D 2-1
©2011 VOTI Inc.
2 U
NPACKING AND
S
ET
U
P
XR3D-6 is shipped fully assembled with the monitor(s) packaged separately.
Tools:
Screwdriver with Security Chuck
3/32 Allen Key
M4 Allen Key
2.1 Set 110/240 Power
Setting the power requirements for your area needs to be done at installation only. To set the
correct power setting for your area, proceed as follows:
1. Unscrew the front base access panel and lift off the unit.
This allows access to the back of the Power Distribution box.
2. Set the 110/240 toggle to your power requirements.
3. Verify the UPS is started by pressing and holding the UPS button until it beeps.
4. Replace and secure the side panel.
2.2 Install the Monitor
To install the touch screen monitor, proceed as follows:
1. Unscrew 4 security screws (M6 x 25 SS machine screw with a 6 point security head) and
remove the top left blue panel.