Voltech PM3000ACE User Manual Download

Page: 61 / 102

IEC61000-3 S

OFTWARE FOR

INDOWS

SER

ANUAL

ETTING

TARTED



Voltech Instruments

VPN 98-025/7

Page 55

4.12.

ERFORMING A

EPEATABILITY

EST

It is a condition of IEC61000-3-2 2001 that 'the repeatability of the

measurements shall be better than 5%…..'.

When more than one 2001 edition fluctuating harmonics result is available,

they may be selected and a repeatability test performed. (This test is found

under the 'result' menu).

To select results to test for repeatability, click on your first choice using the

mouse and then hold the 'CTRL' key when mouse clicking on the others.

The list of results selected appear in the Results Description box. Click on

OK to run the repeatability test.

The repeatability test compares all the harmonic results for each harmonic

from one set of results to every other to see if they are within 5%.

Harmonics less than 0.6% of the input current or less than 5mA are

ignored.

Summary of Contents for PM3000ACE







































































































Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands

Voltech PM3000ACE, User Manual

Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands