Voltech PM3000ACE User Manual Download

Page: 82 / 102

EFERENCE

NFORMATION

IEC61000-3

OFTWARE FOR

INDOWS

SER

ANUAL

Page 76

VPN 98-025/7



Voltech Instruments

6.2.

LOSSARY OF

ERMS

IEC61000-3-2 2001 Minimum Power

This is the power level specified by the standard, below which no limits

apply. (Except for lighting equipment. When Class C is selected this field

is inactive).

At the time of publication (March 2001) this value is 75 Watts.

IEC61000-3-2 2001 Specified Power

The power of the equipment under test as specified by the 'manufacturer'.

The specified power is used to calculate limits for Class D and some Class

C tests. This field is inactive when Class A or Class B is selected.

The power must be determined using the methods detailed below. If the

power is unknown, it will be measured by the analyzer and this value can

be entered retrospectively at the end of the tests and the limits re-computed

accordingly.

(from 6.2.2 of the standard…..)

The value of input power to be used for calculation of limits shall be

determined as follows:

•

measure the 1.5s smoothed active input power in each DFT time

window;

•

determine the maximum of the measured values of power from the

DFT time windows over the entire duration of the test.

The value for power, measured as defined in this clause, shall be specified

by the manufacturer and documented in the test report. This value shall be

used for establishing limits during emissions tests when limits are specified

in terms of power. In order not to specify a power at which limits change

Summary of Contents for PM3000ACE







































































































Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands

Voltech PM3000ACE, User Manual

Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands