Voltech PM3000ACE User Manual Download

Page: 101 / 102

IEC61000-3 S

OFTWARE FOR

INDOWS

SER

ANUAL

EFERENCE

NFORMATION



Voltech Instruments

VPN 98-025/7

Page 95

Additionally, the flicker Pst. z caused by switching the heater on and off

has to be measured within a ten-minute interval. In this interval the power

consumption has to be changed twice in the quickest possible way between

the stages P = 0 and P = Pmax (sequence: 0 - Pmax - 0 - Pmax - 0)

The duty cycle of the heater shall be 50% that is Pmax during 5 minutes.

Evaluate the resultant Pst value by:

and compare against the limit value.

Plt shall not be evaluated.

Test conditions for arc welding equipment and allied processes

For arc-welding equipment, attended whilst in use, and allied processes,

dmax shall be evaluated against the 7% limit for manual switching using

the 24-measurement method.

Additionally, equipment designed to be used for the Manual Metal Arc

(MMA) process, Pst and dc values shall be evaluated according to the

procedures defined in the standard.

Summary of Contents for PM3000ACE







































































































Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands

Voltech PM3000ACE, User Manual

Search results

Summary of Contents for PM3000ACE

Reviews:

Related manuals for PM3000ACE

Brands by name

Popular brands