Vollrath STL-80SS, Operator'S Manual

Page: 57 / 74

54
1. Determine how the Injector Assembly will be
positioned on the freezer. When possible,
follow the recommended position outlined
above.
2. Ensure the freezer barrel is empty before
proceeding. If the freezer has multiple
barrels, ensure all barrels are empty before
proceeding. The suspension bracket is
installed behind the freezer door.
3. Remove the door knobs from the freezer
door.
4. Remove the freezer door from the freezer.
5. Install the bracket back onto the freezer
door post. The bracket should be installed
on the post closest to where the Drive Motor
of the assembly will be.
6. Reinstall the freezer door.
7. Install and tighten the freezer door knobs.
8. For freezer doors with only two knobs and
posts, the installation process is the same.