Vollrath STL-80SS, Operator'S Manual

Page: 30 / 74

27
5. Remove the Injector Assembly from the
Suspension bracket.
NOTE:
DO NOT
ATTEMPT TO REMOVE THE
SPOUT ADAPTER WITH THE ASSEMBLY
ATTACHED! USING THE ASSEMBLY OR
GEAR BOX AS LEVERAGE MAY BREAK THE
ADAPTER OR SPOUT OR DAMAGE THE
INJECTOR HEAD.
6. Remove the spout adapter from the freezer
spout.
NOTE: YOU MAY USE A CLEAN, NARROW
TOOL (SUCH AS A SCREWDRIVER OR
OTHER STURDY ROD) TO GENTLY PRY
THE ADAPTER OFF. PLACE THE TOOL ON
THE ADAPTER PORT AND SLOWLY ANGLE
DOWN AGAINST THE FREEZER DOOR.
Disassembling the Injector Assembly
1. Rotate the Drive Motor to unlock and
remove the Motor from the Gear Box.
2. Rotate the Injector Head to unlock it from
the Gear Box.
3. Remove the Gear Cartridge from the Gear
Box.