G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
9
4 Outlook and main functions
5 Functions in Remote controller
Output port selection (TV1-TV4)
Store location for Display modes
Video wall Main Menu [VW]
Entire video wall position adjustment [P]
To adjust image position at H&V without changing image size [Shift]
Entire video wall Aspect Ratio adjustment [R]
Top Right coordinate menu [TR]
Top Left coordinate menu [TL]
Procedures for determine each LCD image position
1) Select display Mode #—Mode 1~Mode 4 (please select Mode 5 to Mode
10 through OSD)
2) Select output port—TV1~TV4
3) Click Top Left [TL] and input coordinates
4) Click Top Right [TR] and input coordinates
5) Click [Shift] and adjust image position if necessary
6) Adjust aspect ratio if necessary: [Ratio]
7) Adjust image position if necessary: [Position] (after aspect ratio change)
8) No special input sequence is required among TV1~TV4.
Output Ports
TV1/TV2
Output Ports
TV3/TV4
Input Ports
Control ports
USB, IR, IP
Input Status
Input Status
Loop out
