G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
56
15.4.3 [Overlap]: adjust image location and cropping area
Note:
a. The [Overlap] value will change the image captured area and scaling factor. In multiple G413
cascade application, if the cropping area for each G413 is the same size, the [Overlap] value in
each G413 should be the same in order to have the same scaling factor.
b. User can use [Overlap] adjustment to change aspect ratio in video wall. If multiple G413 is used,
each G413 should apply the same Overlap value to get the same aspect ratio.
1) [Pan] is to assign the split image location
for each Display Unit.
2) Horizontal value is calculated from LH to
RH direction and Vertical value is
calculated from top to bottom.
3) User needs to set H & V [Pan] value to
assign the image location for each G413
to build a large video wall display.
1) [Overlap] is to adjust image cropping
location for each Display Unit (G413)
2) User can adjust the image location in
H&V position up to +_1800 pixels.
3) Through [Overlap] adjustment, user can
align each Display Unit into the right
position in the video wall cascaded with
multiple G413.
In 3x3 nine G413 cascade application:
For No.
G413: For No.
G413:
Horizontal Pan = 3 Horizontal Pan = 3
Vertical Pan = 1 Vertical Pan = 2
