G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
6
2 Features:
1)
Flexible video source connection
-
2x HDMI and 1x DP: support up to 8k/1k @30 Hz or 4k/2k @60Hz.
-
1x VGA: support up to WUXGA resolution.
2)
Quad channel outputs
4x FHD HDMI outputs for connecting with 4x LCD or conventional TV / monitor.
3)
System cascade
One HDMI 2.0 loop out port for multiple unit cascade for large scale video wall. No HDMI splitter is
required.
4)
Pre-defined display modes
25 pre-defined creative display modes that can be selected through OSD. Preset modes can be
further modified to meet user’s requirements.
5)
Create any irregular video wall by user
-
User can create any display mode for regular, portrait and irregular video wall using LCDs with
different dimension, resolution and bezel. Use can crop the required image for each LCD
through inputting the coordinates of Top Left and Top Right corners in each monitor.
-
Galign2 PC tool and remote controller are available to upload coordinates into G413.
-
Windows “Paint” software can be used to capture the coordinates in each monitor.
6)
Flexible aspect ratio control
Flexible aspect ratio control across entire video wall through OSD menu is integrated. User can
decide how to display content on the video wall if the content can’t match video wall aspect ratio.
The adjustment range is from 25% to 200% independently in horizontal and vertical directions.
7)
Anyplace cropping
User can crop any image location to be displayed in monitor.
8)
Flexible position adjustment
The combination of flexible aspect ratio control and position adjustment (25% to 200%) will allow
user to determine the best image region for the display on the video wall.
9)
Auto looping playback
User can setup up to 10 display modes from the same display content and looping playback with
selectable time interval (1 second to 600 seconds). This function can be used to highlight specific
image region to show special effect on the video wall dynamically from the same content.
10)
Any display devices
Conventional TV/monitor can be used at top/bottom, LH/RH flip position to balance TV bezel
difference between top and bottom edges.
