G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
5
1 Introduction
VNS creative video wall controller G413 is world unique and the first pure hardware solution that
can create all kinds of display modes through IR remote controller or simple PC tool. 25 Preset Modes can
be selected through OSD. These Preset Mode can be further edited to meet user’s different requirements.
Conventional low-cost monitor with different dimension, resolution and bezel size can be used as display
devices. The LCD can be installed at any angle and position. User can install LCD first, then crop the
required image for each LCD by remote controller or PC tool.
G413 is 4 screen video wall controller with PIP/POP function and supports up to 8k/1k 30Hz and
4k/2k 60hz input signal. HDMI 2.0 loop out port is available for daisy chain connection. It can be cascaded
to create large scale video wall.
Dynamic aspect ratio and position adjustment for entire video wall are special features of G413.
User has flexibility in seamless showing different cropping area or aspect ratio on the video wall with
different time interval. This function can be used to highlight specific image region or to show special effect
on the video wall dynamically from the same content. It also provides programmable background color in
video wall blanking area if the content is not full screen.
System setup and control can be executed through IR remote controller, RS232, USB or Ethernet.
Dual power supply systems are designed in G413. User can use AC 100-240V or DC12V. When AC is
applied, there will be one DC12V 1A output as the power supply for signal extender.
G413 is designed with highest industrial standard for 7/24 working environment. It provides a
simple, flexible and reliable solution for creative video wall.
