G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
38
- Mode 1: factory default settings, 4 independent images with the same content at different
direction
- Mode 2: to put TV1 into 1/4 of the [All in One] image
- Mode 3: to put TV1 & TV2 into 2/4 of the [All in One] image
- Mode 4: to put TV1 &TV2 & TV3 into 3/4 of the [All in One] image
- Mode 5: to combine TV1, TV2, TV3 and TV4 into one complete [All in One] image
12.5.2 Procedures to create looping playback modes
To set coordinates for TV1-TV4 to become one complete image.
To save the same settings into Mode 2- Mode 5
- Select Mode 2 and click [Write] command.
- Select Mode 3 and click [Write] command.
- Select Mode 4 and click [Write] command.
- Select Mode 5 and click [Write] command.
To modify the settings for each Mode
- Select [Mode 1] and click [Reset] to reset Mode 1 to show source image in all TV.
- Modify Mode 2 to keep TV1 setting and reset all the rest to default setting
- Modify Mode 3 to keep TV1 & TV2 setting and reset all the rest to default setting
- Modify Mode 4 to keep TV1, TV2 and TV3 setting and reset TV4 to default setting
To set Looping playback
- Set [Loop Range] = 5 (looping from Mode 1 to Mode 5)
- Set [Loop Time] = 1 (for 1 second interval)
Save to Profile 1 & 5 (Profile 5 as Backup)
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 1
