G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
27
11 Preset mode application case study
11.1
Preset
Mode: Mode 01
1) Connect G413 outputs to related LCD
-
CH-1 to TV1
-
CH-2 to TV2
-
CH-3 to TV3
-
CH-4 to TV4
2) If bezel compensation is required, please
apply GeoBox test pattern and change
coordinates in each channel.
-
TV1: Reduce X coordinate in Top RH to
enlarge image to bezel center point in
both H&V directions.
-
TV2: Increase X coordinates in Top LH
to enlarge image to bezel center point in
both H&V directions.
-
TV3: Reduce X coordinate in Top RH to
enlarge the image and use [Shift] to
shift the image up.
-
TV4: Increase X coordinate in Top LH in
TV4 to enlarge the image and use
[Shift] to shift the image up.
3) After the bezel compensation, if user can’t
see full screen image, please use [Ratio] &
[Position] to do fine-tune.
4) User can show dual contents in one 2x2
video wall through PIP or POP function. No
need to change any connection. Two
sources for PIP/POP shall be HDMI + DP,
HDMI+VGA or DP+VGA.
TV1
TV3
TV2
TV4
