G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
62
Case Study: when cascade with two G413, user can set below display modes and save in [Profile].
1) To show cascaded image with single content across whole video wall.
2) To show two side by side contents across whole video wall.
3) To show one PIP content in cascaded image.
4) To show two PIP contents in cascaded image.
User can save these different display modes in G413 and recall them by RS232, remote controller,
USB or Ethernet.
15.5.5.6 [Network]
15.5.5.6.1 [RS232]
1) RS232 interface is designed with DB-9 connector. User can select 11520 or 9600 baud rate by
OSD, WebGui or Galign2 PC Tool.
2) The protocol can be implemented via RS-232, USB, Ethernet or other forthcoming communication
methods.
15.5.5.6.2 [Ethernet]
1) Ethernet control: G413 is integrated with RJ45 connector. Please connect G413 with Ethernet
Router or Switch/Hub via LAN port.
1) [Profile] is to save and load user settings
2) User can save all the settings into Profile
and recall the settings by remote
controller, RS232, USB or Ethernet.
3) When execute system reset, Profile
settings will remain the same without
change.
