G413 User Guide Document: G41302
-------------------------------------------------------------------------------------------------------------------------------------------
37
User can create up to10 different Display Modes and looping playback under preset time
interval. This function can be used to highlight different products from the same image content
without PC system. For instance, if one photo consists of 4 products. User can display all
products in Mode #1, then pop-up product A in Mode #2, product B in Mode #3, product C in
Mode #4 and product D in Mode #5. After set looping playback, user will see advertisement
for complete image, then highlight each product at specific LCD in sequential order.
Display Modes and time interval from OSD is selectable.
Please note that the looping display modes starts from Mode 1. If select “3”, then only Mode
1-3 can be in the loop.
Maximum looping playback modes is 10. If user saves two same display Mode and execute
looping playback. Then this display Mode will have double display time interval.
User can apply this function to shift image with small step each time in specific time interval to
prevent from LCD burn-in mark.
12.5.1 Example for looping playback
Please check YouTube Video at:
https://youtu.be/4Gc0KcuX27g
Description: 4 LCD installed at different directions.
Looping Range: 5 (5 Modes), Looping Time: 1 second
Display Mode settings:
1) User can select the Mode # for looping
playback in [Loop Range].
2) If select “3”, then only Mode #1, Mode #2
and Mode #3 can be selected for looping
playback.
1) The time interval to switch among
different Display Mode can be set by
[Loop Time].
2) The max looping time interval is 10
minutes (600 seconds)
3) User can create different [Mode #] to
highlight different products from the same
input source.
