Viessmann VITOCAL 300, Installation And Service Instructions Manual

Page: 9 / 160

Positioning
Wall clearances (viewed from above)
& The installation location must be
free from the risk of frost and must
be able to be adequately ventilated.
& The thermal insulation of cold com-
ponents should be improved in
accordance with standard practice
to prevent condensation.
Overview of possible system versions
In the following, 3 typical heat pump
system designs are shown by way of
an example.
The heating system installation also
applies to Viessmann heat pumps
type WWS (comprising type BWC and
a conversion kit), giving due consid-
eration to type-specific features. The table gives an overview of all pos-
sible system versions (combination of
standard equipment level and a line of
options for each system design).
Positioning
9
Preparing for installation
55
92
901
GB