VIDAR CAD PRO Advantage Installation And Operation Manual Download Page 103

Page: 103 / 144

Preventive maintenance

Cleaning the Auto-Feed Roller

IAGNOSTIC

™ Advantage and D

OSIMETRY

™ Advantage only]

After extensive use, dust or lint particles may build up on the Auto-Feed
Roller. VIDAR recommends cleaning the roller at least twice per year.

Auto-Feed Roller

Loop a piece of light adhesive
tape (such as Scotch® Magic™
Tape) around your fingers with
the adhesive side out, then gently
pat the roller. Pat and turn the
roller until its entire surface is
clean.

CAUTION:

Do not

use any type of cleaning solvent on the feed roller

and idler wheels, as this could damage these components
and cause improper operation.

Do not

use tape with a strong adhesive, such as packing

tape or strapping tape.

Do not

use tape requiring the adhesive to be wetted, such as

brown paper packing tape.

VIDAR Advantage Series Installation and Operation Guide

Summary of Contents for CAD PRO Advantage

















































































































































Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands

VIDAR CAD PRO Advantage, Installation And Operation Manual

Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands