VIDAR CAD PRO Advantage, Installation And Operation Manual

Page: 138 / 144

133
Electromagnetic guidance
Caution: Medical electrical equipment.
EMC (Electro Magnetic Compatibility) must be considered before any medical electrical equipment
is installed or put into service. Follow the information in the accompanying documentation when
installing and operating the Digitizer.
Caution: Portable or mobile RF communication equipment can effect Medical Electrical equipment.
Caution: Using the Digitizer adjacent to or stacked with other equipment may cause interference
between the equipment. Before utilizing stacked or adjacent equipment, verify proper functionality
of all equipment in the actual configuration in which it will operate.
Caution: Connecting the Digitizer to equipment that is not rated CISPR 11 class A or class B may
alter the electromagnetic characteristics.
Caution: In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Guidance and manufacturer’s declaration –
electromagnetic equipment
Guidance and manufacturer’s declaration – electromagnetic immunity
Table 202
T
for use in the e
e customer or end user should assure that
they are used in such an environment.
he D
IAGNOSTIC
P
RO
Advantage, D
OSIMETRY
P
RO
Advantage and C
AD
P
RO
Advantage Digitizers are intended
lectromagnetic environment specified below. Th
Emi ssions test Compliance Electromagnetic ent - guidance environm
RF Emissions
CISPR11
Group 1
The Digitizers us
here
and are not likely
nic equipm
e RF energy only for their internal
fore, their RF emissions are very low
to cause any interference in nearby
ent.
functions. T
electro
RF Emissions, CISPR11 Class A
H nic Emissions armo
IEC 61000-3-2
Class A
Voltage Fluctuations/
flicker emissions
IEC 61000-3-3
Complies
The Digitizers are ents
other than domestic and those directly connected to the
public low voltage power supply network that supplies
buildings used for domestic purposes.
suitable for use in all establishm
The D
IAGNOSTIC
P
RO
Advantage, D
OSIMETRY
P
RO
Advantage and C
AD
P
RO
Advantage Digitizers are
intended for use in the electromagnetic environment specified below. The customer or end user of the
Digitizer should assure that it is used in such an environment.
Table 201
IEC 60601 test
level Electromagnetic environment -
guidance
Immunity test Compliance level
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%
ElectroStatic Discharge
(ESD) + 6 kV contact + 6 kV contact
IEC 61000-4-2 + 8 kV air + 8 kV air
Electrical fast transient/
burst ±2 kV for power
supply lines ±2 kV for power
supply lines Mains power quality should be that of
a typical commercial or hospital
VIDAR Advantage Series Installation and Operation Guide