VIDAR CAD PRO Advantage Installation And Operation Manual Download Page 121

Page: 121 / 144

116

SCSI cable

Use VIDAR part number 4270 only.

Connecting the cable

Note:

Attach or remove the SCSI cable carefully to avoid

bending the connector pins. Insert the connector straight into
the SCSI port. Inserting the connector at an angle may damage
the pins. If the pins or cable are damaged, improper SCSI
operation may result.

Note:

Before connecting the SCSI cable, be certain that the PC

and digitizer are OFF.

Carefully

attach the SCSI connector to the digitizer’s SCSI port.

Apply even pressure to avoid bending SCSI connector pins.

Do not

force the connectors together.

2. Connect the other end of the cable to the SCSI port on the computer.

WARNING:

If the SCSI connector has bent pins, it will damage

the SCSI port in the digitizer. Do not attempt to straighten bent
pins. Discard any SCSI cable with bent pins and replace it with
a new cable.

VIDAR Advantage Series Installation and Operation Guide

Summary of Contents for CAD PRO Advantage

















































































































































Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands

VIDAR CAD PRO Advantage, Installation And Operation Manual

Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands