VIDAR CAD PRO Advantage Installation And Operation Manual Download Page 58

Page: 58 / 144

1. Install the SCSI card.

This section provides general instructions for installing the SCSI card.
Refer to your computer’s manual for specific instructions.

a. Turn off power to the computer and disconnect the computer’s power

cord from the electrical outlet.

b. Remove the cover from the computer. (Refer to the computer’s

manual for instructions on removing the cover.)

Tip:

If the computer is a tower model, it’s easier to install the

SCSI card when the tower is laid on its side.

c. Locate an unused PCI expansion slot (PCI connectors are typically

white or ivory). Remove the expansion slot cover. Save the slot
cover screw for use in step g.

PCI expansion slots

d. Before handling the SCSI card, discharge your static electricity by

touching a metal part on the computer chassis.

e. Remove the SCSI Card from its anti-static packaging.

Handle the

card only by its edges.

continued

VIDAR Advantage Series Installation and Operation Guide

Summary of Contents for CAD PRO Advantage

















































































































































Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands

VIDAR CAD PRO Advantage, Installation And Operation Manual

Search results

Summary of Contents for CAD PRO Advantage

Reviews:

Related manuals for CAD PRO Advantage

Brands by name

Popular brands