VIDAR CAD PRO Advantage, Installation And Operation Manual

Page: 64 / 144

59
Installing SCSI drivers
Note:
On Windows™ 2000 computers, Service Pack 2 or higher
must be installed for SCSI installations. Computers without
Service Pack 2 or higher will not be supported.
On Windows™ XP Professional Edition, Service Pack 1 or
higher must be installed for SCSI installations.
VIDAR’s STI device driver provides compatibility between VIDAR film
digitizers/scanners and
Windows™ 2000 and Windows™ XP only .
The STI driver takes advantage of Microsoft’s Still Image Architecture
(STI) for digital imaging devices.
You will need:
VIDAR Drivers and Toolkit Installation CD.
Note: These instructions have been successfully tested on a
wide range of Windows™ 2000 and Windows™ XP systems. In
rare instances, you may have difficulty installing the STI driver.
If that happens, try again after logging on as Administrator, or as
a user with Administrator rights.
1. Be sure the digitizer is turned OFF, and is NOT connected to the PC.
Wait until you are prompted to connect the digitizer.
2. Turn on the PC.
3. Insert the VIDAR Drivers and Toolkit Installation CD into the CD-
ROM. The installer should launch automatically.
VIDAR Advantage Series Installation and Operation Guide