VeEX MTX150x Lite User Manual Download Page 33

Page: 33 / 148

Ethernet

ARP table aware of the test set's IP address. This setting is useful for long-term L3 routed testing.

Results Auto Save

: ON or OFF. If set to ON, results will be saved automatically.

IP Connection

Port setup and IP connection are required prior to performing the following Ethernet applications: Ping, Trace
Route, Web/FTP, ARP Wiz, VoIP, IPTV testing, and 1388v2 (except Layer 2).

Tap

from the Ethernet home menu to access Port and IP settings.

IP menu option

Setup

Select

PPoE

IPv4

, or

IPv6

from the

Mode

menu.

Point-to-Point Protocol over Ethernet (PPoE)

Authentication:

PAP, CHAP, or CHAP & PAP.

VLAN:

Off or 1 Tag.

ID:

VLAN ID. Enter value 0 to 4095.

Pri:

VLAN priority 0 to 7.

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands