VeEX MTX150x Lite User Manual Download Page 66

Page: 66 / 148

Platform Functions

Tap the filter icon

in the column header row to filter for specific test results stored on the unit.

At the top of the screen, tap the green buttons for view options.

Column

: Hides/shows selected columns

Show All

: Shows all columns

Advanced

: Search for a specific file using advanced search terms

Selecting columns to make visible

Viewing and Managing Files

Use the options at the bottom of the screen to manage selected file(s).

Opens the selected test report (one).

Closes the current test report and goes back to the File Manager.

Deletes all unlocked test reports that are selected with checkmarks.

Renames the selected test report (one).

Unlocks or Locks test reports. Locked reports are identified by a red padlock icon.
Locked test reports cannot be deleted or renamed.

Generates a PDF copy of the test report and stores it in an attached USB memory
stick (required) for distribution (e.g., via email).

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands