VeEX MTX150x Lite User Manual Download Page 74

Page: 74 / 148

Platform Functions

Focus Knob

: a rotating dial that can be turned clockwise or counterclockwise to view clearer image.

Make sure connector is properly seated in the adapter tip.

USB Type A output

: USB connector to plug into host power source to enable operation.

DI-1000MPO Digital Fiber Inspection Microscope for Single and Multi-Fiber Connectors

DI-1000MPO Digital Fiber Inspection Microscope for Single and Multi-Fiber Connectors

WiFi support requires VeEX Power Bank/WiFi Bridge accessory and host

device/test set has built-in WiFi capability. See the test set's data sheet on

www.veexinc.com or contact

VeEX Customer Care

for more information.

To work with single fiber tips, the front end tip should be replaced with the collar

provided with the scope. For more information adapter tips, see the DI-1000 Digital

Fiber Inspection Microscope Adapter Tips Guide on www.veexinc.com.

For more information on using the DI-1000MPO, see the DI-1000MPO Quick Guide on www.veexinc.-

com.

DI-1000MPO Fiber Analysis

There are two methods to inspect MPO fibers using the DI-1000MPO:

Touchscreen (standard)

Press the touchscreen's

Capture Fiber

button for every MPO fiber properly focused, analyzed, and

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands