VeEX MTX150x Lite User Manual Download Page 20

Page: 20 / 148

Basic Operation

Off - Power is OFF, not charging.

Orange - Battery is charging.

Green - Power is ON.

E. Micro-B USB:

Use an USB-A OTG cable (included with purchase) to connect a USB to the micro-B USB

port. The port supports memory drives and USB add-on devices such as fiberscopes. An optional Micro-B
OTG to Ethernet adapter is also available for network connection. (only VeEX approved OTG to Ethernet
Cables can be used)

G. Test port connector

Optical Test Port (SFP+):

Ethernet 100BASE-FX, 1/10GBASE-X

UTP Test Port (RJ45)

: Ethernet 10/100/1000BASE-T, 2.5/5/10BASE-T

Use certified CAT 6a or CAT 7 UTP test patch cords.

H. Touch screen LCD

I. Stylus

(use when finer touch screen control is required).

J. DC power socket:

(use VeEX-supplied AC/DC chargers only).

Special Functions

The buttons on the V150 platform provide additional functions, by using combinations of them (may vary
between products).

Button Quick Guide (displayed during the boot-up sequence)

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands