VeEX MTX150x Lite User Manual Download Page 119

Page: 119 / 148

119

Platform Functions

Save Test Results

To save the results of a test, from the remote computer, press the

Save

button below the screen image. Then

use the pop-up keypad and/or the PC keyboard to enter the file name and add any extra details (if Advanced
Save is enabled).

Access Remote Test Result Files

The

Remote Platform Access

tab provides links to access test results, test profiles, screen shots, the user

manual and other information stored in the test set.

A tab will open up for each selection made, allowing for quick access to each function.

Profiles

Test Profiles are configurations saved by the user that can be retrieved and reapplied to the test set. For
example, commonly used configurations and test limits/threshold can be saved as test profiles, for different
types of services.

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands