VeEX MTX150x Lite User Manual Download Page 38

Page: 38 / 148

Ethernet

ARP Wiz Setup

ARP Result

The MAC addresses associated with active IP addresses in the range are displayed. If no MAC address is
associated with the IP address, a

FAILED

status is displayed.

ARP Wiz uses the ARP protocol and can only work within the same subnet as the IP address provided to

the test set in IP Status

ARP Wiz Result

Ping

The Ping Result provides the number of Sent, Received, Unreach, Missing, and the Round Trip delay.

Ping Testing

Ping is a popular computer network tool used to test whether a particular host is reachable across an IP net-
work. A ping is performed by sending an echo request or ICMP (Internet Control Message Protocol) to the echo
response replies.

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands