VeEX MTX150x Lite User Manual Download Page 99

Page: 99 / 148

Platform Functions

Time Out:

Time-to-Live (TTL) in milliseconds. Enter the maximum time allowed (in ms, up to 99999

ms) between an ICMP ping and echo response.

Once the parameters are configured, press

Start

to begin the test.

Ping Results

Pressing Ping will take you to the

Result

tab and start the Ping test.

Ping Result

Destination:

Indicates the destination IP address.

Ping status:

In Progress, PASS, or FAIL.

Sent, Received, Unreach, Missing:

Number of pings sent, received, unreached or missing. A Ping

is counted missing if no response is received before timeout. A Ping is counted unreached if an echo

response is received with host unreachable set. Ping also estimates the round-trip time in mil-

liseconds.

Current:

The current time for a Ping request to be answered.

Average:

The average time recorded for a Ping request to be answered.

Max:

The maximum time recorded for a Ping request to be answered.

Min:

The minimum time recorded for a Ping request to be answered.

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands