Veeco Dektak 150, User Manual

Page: 142 / 349

Multiple Scan Operation 5-37
Figure 5-59: Micro Form Measurement Section
5 Click Apply , and then click OK .
NOTE –
The h and L values in the Micro Form Measurement section are factory-set. If
there is a problem with these settings, call Veeco.
SETTING PRINTER OPTIONS
In the Automation Program window, click Printer Output in the Automation Program Options
section. This opens the Extended tab in the Automation Program Options dialog box (see Figure
5-13 ). You have three printer options: None , Print Plot , and Print APS (see Figure 5-60 ).
Figure 5-60: Printer Output Section of the Extended Tab
Make one or more of the following selections:
•
Select None to prevent the printer from producing any printouts.
•
Select Print Plot to print the plotted profile trace after each completed scan routine, along with
the scan data. The plot prints on a single page.
•
Select Print APS to print the Automation Program Summary Report in landscape orientation
on a single page. For more information, see Activating the APS Report Function on page 5-27 .
SETTING THE TIMING OPTIONS
In the Automation Program window, click Timing in the Automation Program Options section to
display the Extended tab of the Automation Programs dialog box (see Figure 5-13 ).
Select one of the following options in the Timing section (see Figure 5-61 ):