Varian 4000 GC, Hardware Operation Manual

Page: 118 / 161

Changing from Internal to External Configuration
1. To switch sources from Internal to External, go to “Switching Between
External and Internal Sources” on page 84.
2. To switch the transfer line position from entering the Ion Trap to entering the
External source, go to “Changing the Transfer line Position from Internal to
External” on page 87.
Changing from External to Internal Configuration
1. To switch sources from External to Internal, go to “Switching Between
External and Internal Sources” on page 84.
2. To switch the transfer line position from entering the External source to
entering the Ion Trap, go to “Changing the Transfer line Position from
External to Internal” on page 85.
Changing from Internal to Hybrid Configuration
1. To switch sources from Internal to Hybrid, go to “Switching Between External
and Internal Sources” on page 84.
2. Go to “Installing or Removing the Hybrid Plug” on page 89.
Changing from External to Hybrid Configuration
1. To switch the transfer line position from entering the External Source to
entering the Ion Trap, go to “Changing the Transfer line Position from
External to Internal” on page 85.
2. Go to “Installing or Removing the Hybrid Plug” on page 89.
Changing from Hybrid Mode to External
Configuration
1. Go to “Installing or Removing the Hybrid Plug” on page 89.
2. To switch the transfer line position from entering the Ion Trap to entering the
External Source, go to “Changing the Transfer line Position from Internal to
External” on page 87.
Changing from Hybrid Mode to Internal Configuration
1. Go to “Installing or Removing the Hybrid Plug” on page 89.
2. To switch sources from External to Internal, go to “Switching Between
External and Internal Sources” on page 84.
Switching Between External and Internal Sources
1. To remove the Source/Ion Trap Assembly, go to page 40.
84 of 127